Tamizado de polvo de coco en Malasia

Descripción general del proyecto

A customer in Malaysia contacted us about replacing a 1000 mm rotary vibrating screen used for coconut powder screening. The existing machine had low screening efficiency and limited output. Cleaning and maintenance also took too much time and manual work.

The customer needed to screen coconut powder through a 5-mesh screen at a required throughput of 2.5 tonnes per hour. After discussing the material and the problems with the existing machine, we recommended a 2000 mm single-deck unit with bouncing ball screen cleaning and stainless steel product-contact parts.

tamizado de polvo de coco

Understanding the Customer’s Requirements

The discussion started with the existing equipment. The customer wanted more capacity, but cleaning and maintenance were also reasons for considering a replacement.

We then clarified three points that guided the selection:

  • Material: Coconut powder with somewhat poor flowability.
  • Screen size: 5 mesh.
  • Capacidad requerida: 2.5 tonnes per hour.

The material’s flowability mattered. We needed to consider how it would spread across the screen, as well as the available screening area. Recommending a replacement based only on mesh size would not address the customer’s capacity concerns.

Maintenance remained part of the discussion, including screen cleaning and the availability of replacement mesh.

Solución recomendada

A Larger Screen Diameter

We recommended increasing the machine diameter from 1000 mm to 2000 mm to provide more screening area.

The larger diameter gives the coconut powder more room to spread across the screen. This was the main equipment change proposed to support the customer’s required throughput.

The selection was based on a 2.5 t/h requirement. Actual throughput depends on the material condition and feeding rate and should be confirmed during operation.

A Single 5-Mesh Screen

The customer required one screening stage, so we specified a single-deck arrangement with a 5-mesh screen.

This keeps the configuration straightforward, with one screen to inspect, clean and replace during routine maintenance.

Bouncing Ball Screen Cleaning

We included a bouncing ball system beneath the mesh. During operation, the balls strike the underside of the screen to help dislodge trapped particles and keep the openings clear.

This feature is intended to reduce interruptions for manual mesh cleaning. It does not replace routine cleaning, but it helps address one of the customer’s maintenance concerns. Our guide to screen clogging and prevention explains this issue in more detail.

Stainless Steel Product-Contact Parts

Stainless steel was specified for the parts in contact with coconut powder, in line with the customer’s food-processing requirements.

The contact materials and cleaning needs were considered as part of the food screening equipment configuration.

Especificaciones del Equipo

ArtículoEspecificación del proyecto
Ubicación del clienteMalaysia
MaterialCoconut powder
Material flowabilitySomewhat poor
Previous equipment1000 mm rotary vibrating screen
Recommended machine diameter2000 mm
Plataformas de cribaOne
Tamaño de malla5 mesh
Capacidad requerida2.5 t/h
Limpieza de la mallaSistema de bolas de limpieza
Product-contact partsAcero inoxidable
Compra adicionalSpare screen mesh

Key Equipment Features

The configuration addresses the customer’s capacity and maintenance concerns through a few practical choices:

  • Larger screening area: A 2000 mm diameter provides more space for material distribution.
  • Single-deck construction: Only one screen needs routine inspection and replacement.
  • Bouncing ball cleaning: Helps keep mesh openings clear during screening.
  • Stainless steel contact parts: Selected for the food-processing application.
  • Spare mesh: Available for future replacement without waiting to order it when needed.

For other sizes and configurations, see our criba vibratoria rotatoria product page.

Customer Feedback and Spare Screen Selection

The customer’s feedback on the original machine shaped the recommendation: low output was a problem, but so was the work involved in keeping the equipment clean and maintained.

During the selection process, the customer also chose to purchase spare screen mesh for future replacement. This decision addressed a practical concern raised from the start—making maintenance easier to plan.

The agreed configuration therefore covered both the screening requirement and the replacement parts the customer expected to need.

Related Case

See our proposal for almond flour screening with a 1200 mm sifter, which also includes bouncing ball cleaning. That application uses a 10-mesh screen and requires an elevated installation with an overhead feeding hopper.

Discuss Your Coconut Powder Screening Requirements

If your current sieve is struggling with capacity or taking too much time to clean, contacte con nuestro equipo.

Tell us your material, required throughput, mesh size and current machine diameter. Photos or a short video of your existing process can also help us understand the problem and recommend a suitable configuration.

Artículos relacionados