Industrial Screw Conveyor Systems for Bulk Material Handling

Industrial screw conveyors are designed for continuous, efficient handling of bulk materials such as powders, granules, and semi-solids. With a compact structure and enclosed design, they ensure stable conveying performance, reduced dust emission, and low maintenance in various industrial applications.

YuanJing provides customised screw conveyor solutions based on your material characteristics, capacity requirements, and plant layout. From horizontal to inclined or vertical configurations, each system is engineered for reliable operation and long service life. Widely used in food, chemical, construction, and mining industries, can be used in conjunction with various Endüstriyel elek machines.YuanJing helps improve handling efficiency while reducing overall operating costs.

Price:$1000.00 – 20,000.00/Set

Conveying length: 10-20 meters

Delivery capacity: 9-134m³/h

Tilt angle: horizontal or tilted below 20 degrees

Teklif Alın E-posta ile gönder

What is a Screw Conveyor?

A screw conveyor is a continuous conveying device that uses rotating screw blades to forcefully move materials; it is primarily used to convey various powdered, granular, and small lump materials. Screw conveyors feature a simple structure, excellent sealing performance, convenient operation, low power consumption, and versatility, capable of conveying materials horizontally, at an incline, or vertically. In a screw conveyor, the material does not move relative to the screw blades but is pushed toward the discharge end as the blades rotate. This enables sealed conveying, reducing material spillage and waste. Screw conveyors are cost-effective, have high conveying capacity, and operate smoothly and quietly, allowing them to perform special tasks that other conveying equipment cannot accomplish.

screw-conveyor

Çalışma Prensibi

When the screw shaft rotates, material is driven forward by the combined action of gravity and friction between the material and the trough wall. Under the pushing force of the rotating screw blades, the material moves continuously along the bottom of the conveyor. This motion is similar to a non-rotating nut translating along a rotating screw. The primary conveying force is generated by the tangential and axial components of the blade rotation, which push the material upward and forward.

Structural Design & Material Movement

To maintain the screw shaft in a favorable tensile condition, the drive unit and discharge outlet are typically positioned at the same end, while the inlet is located near the opposite tail end. During operation, the rotating blades continuously push the material forward. The resistance preventing the material from rotating with the screw includes its own weight and friction against the conveyor casing, ensuring stable axial movement instead of rotation.

Blade Types & Mechanical Support

Screw blade design varies based on material characteristics, including solid (continuous flight), ribbon, and paddle types, to optimize conveying performance. A thrust bearing is installed at the discharge end to absorb axial forces generated during operation. For longer conveyors, intermediate hanger bearings are required to support the shaft, maintain alignment, and ensure stable, long-distance conveying performance.

Screw Conveyor Structure

A screw conveyor mainly consists of three parts: the screw body, the inlet, and the outlet. The core component is the screw blade mounted on the central shaft. The motor drives the screw blade to rotate, thereby conveying materials.

  • Drive Unit (Motor & Gearbox): Provides stable rotational power and torque, ensuring continuous and efficient material conveying performance.
  • Screw Shaft & Helical Flight: The rotating shaft with welded or formed flights moves materials along the conveyor length.
  • Trough or Tube Housing: Encloses the screw assembly, preventing material leakage and protecting the system from external contamination.
  • Bearing System (End & Intermediate Bearings): Supports the screw shaft, reduces friction, and maintains alignment during operation.
  • Sealing System: Prevents dust leakage and material spillage, ensuring clean and safe operation in industrial environments.
  • Inlet Hopper & Outlet Discharge: Designed for smooth material feeding and controlled discharge, improving overall handling efficiency.
  • Inspection & Maintenance Ports: Allow easy access for cleaning, inspection, and routine maintenance to minimise downtime.
Parts of a Screw Conveyor

Types of Screw Conveyors

Based on the eight configurations shown in the figure, a brief description is provided below:

Types of Screw Conveyors
  • Inclined large hopper: A large-capacity hopper combined with an inclined conveyor, suitable for bulk feeding via manual loading or ton bags, reducing the frequency of feeding. Ideal for powders and granules.
  • Motor top mount: The motor is mounted at the top to prevent material contamination of drive components, making it suitable for applications with hygiene or dust-proof requirements.
  • Vertical standard: Vertical lifting with a small footprint, designed for space-constrained environments and suitable for short-distance vertical conveying.
  • Parallel transfer: Horizontal layout with a simple and stable structure, suitable for point-to-point conveying within workshops or connecting equipment.
  • Inclined mobile: Equipped with casters for mobility, featuring inclined feeding; suitable for shared use across multiple workstations or temporary production lines.
  • Irregular top mount: Customised for special installation angles or spaces, addressing integration challenges with irregularly shaped workstations.
  • U horizontal: U-shaped trough structure, facilitating cleaning and maintenance; suitable for continuous conveying of standard powders.
  • Custom large hopper cover: Large hopper with a sealed cover, providing dust and moisture protection, suitable for environments with high requirements or materials with volatile properties.

Features of Screw Conveyor

Screw conveyors provide efficient, enclosed bulk material handling with stable conveying performance, high capacity, and flexible

customisation. Designed for powders, granules, and semi-solid materials, they ensure minimal material loss,
low maintenance requirements, and reliable operation across diverse industrial applications.

  • Simple Structure & Easy Maintenance
    Optimised mechanical design reduces complexity, enabling quick maintenance, lower downtime, and long-term operational reliability.
  • Large Capacity & Wide Application Range
    High conveying capacity supports diverse industries, handling powders, granules, and bulk materials efficiently.
  • Strong Environmental Adaptability
    Dustproof and waterproof configurations ensure stable performance under harsh, humid, or dusty industrial conditions.
  • Smooth Conveying Without Blockage
    Continuous screw motion prevents material buildup, minimising jamming risks and ensuring consistent conveying performance.
  • Wide Material Compatibility
    Handles various materials across temperature and humidity ranges, with minimal limitations on physical properties.
  • Customizable Design Options
    Flexible configurations available to meet specific process requirements, ensuring optimal performance for different applications.

Teknik Özellikler

Capacity varies depending on material density and flow characteristics,Length and power can be customised based on project requirements,Speed is adjustable according to conveying conditions.It can be paired with various vibrating sifters (e.g., sallamalı eleme makinesi, deterjan tozu eleme makinesi, industrial salt sifters, kırmızı biber tozu eleme makinesi, ve un eleme makinesi) to create an integrated production workshop that combines conveying and screening operations.

ModelDiameter (mm)Capacity (TPH)Length (m)Power (kW)Speed (RPM)
LS1001001 – 31 – 101.1 – 2.260 – 90
LS2002005 – 152 – 152.2 – 5.550 – 80
LS30030015 – 403 – 204 – 1140 – 70
LS40040030 – 705 – 257.5 – 1530 – 60
LS50050060 – 1205 – 3011 – 2220 – 50
LS600600100 – 2006 – 3515 – 3020 – 45

Uygulamalar

Food Processing Industry

Gıda Endüstrisi

Salt, Milk powder, Starch,Un, Grain, Coffee powder

Kimya Endüstrisi

Kimya Endüstrisi

Calcium carbonate, Soda ash, Fertiliser, Plastic pellets, Resin, Titanium dioxide

Cement & Construction

Cement & Construction

Cement, Sand, Fly ash, Lime, Gypsum, Mortar

Mining & Minerals

Mining & Minerals

Coal, Iron ore, Copper concentrate, Silica sand, Slag

Özelleştirme

Screw conveyors can be configured to match different materials, capacities, and installation conditions. A proper design ensures stable conveying performance, reduced wear, and long-term reliability.

  • Malzeme Seçimi: Carbon steel or stainless steel (304/316) is chosen based on corrosion resistance, hygiene standards, and the nature of the material being handled.
  • Diameter & Capacity: The screw diameter directly affects conveying capacity. Larger diameters are suitable for higher throughput and bulk handling requirements.
  • Length & Layout: Equipment length is customised according to plant layout, supporting flexible installation in limited or complex spaces.
  • Inclination Angle: Systems can be designed for horizontal, inclined, or vertical conveying, depending on process requirements and site conditions.
  • Screw & Flight Type: Shafted screws are suitable for dry materials, while shaftless designs handle sticky or fibrous materials. Flight types such as continuous, ribbon, or paddle are selected based on material flow characteristics.
  • Drive & Control: Motor and gearbox configurations can be fixed or variable speed to ensure stable operation under different working conditions.
  • Inlet, Outlet & Sealing: Feeding and discharge points can be arranged as needed, with sealing options available to reduce dust leakage and meet environmental or sanitary requirements.
  • Voltage & Motor Standard: according to your local power requirements

This flexible design approach allows screw conveyors to adapt to a wide range of industrial applications while maintaining efficient and consistent material handling.

Tubular Screw Conveyor vs U-Trough Screw Conveyor

The U-shaped screw conveyor is a type of screw conveyor well-suited for small-scale operations and stable material transport, making it highly effective in settings with spatial constraints. It offers excellent sealing performance, providing significant advantages in environments where dust control or environmental compliance is critical, as it effectively prevents dust generation during transport. However, U-shaped screw conveyors are not ideal for long-distance transport, entail higher costs, and can cause damage—such as crushing—to fragile materials.

Tubular screw conveyors are unsuitable for transporting materials that are prone to spoilage, highly viscous, or prone to caking. Such materials tend to adhere to the screw flighting and rotate with it rather than advancing, or they may form blockages at the hanger bearings, thereby preventing the conveyor from operating correctly. The LS-series screw conveyor comes in five specifications with screw diameters ranging from 200 mm to 500 mm and lengths spanning 4 m to 70 m (in 0.5 m increments); while standard nominal lengths are used for selection, custom configurations are available to meet specific requirements.

İlgili videolar

Why Choose Us as Your Helezon Konveyör Supplier

Choosing the right supplier is critical to ensuring reliable performance, consistent quality, and long-term cost efficiency. A professional manufacturer not only provides equipment, but also delivers tailored solutions based on real production needs.

Customised Solutions

Each screw conveyor is designed according to material characteristics, capacity, and site layout to ensure optimal performance and integration.
 
Stable Manufacturing Quality

Strict production standards and quality control ensure durable structure, precise fabrication, and reliable operation in demanding environments.

Wide Industry Experience

Proven applications across food, chemical, construction, and mining industries allow for practical and efficient design solutions.

Flexible Configuration Options

Support for various materials, screw types, drive systems, and sealing requirements to meet different working conditions.Compatible with production lines (vibrating screens or dust free dumping station).

Efficient Delivery

Standardised production processes and project management help shorten lead times and ensure on-time delivery.

Teknik Destek

From selection to installation, professional guidance is provided to ensure smooth operation and reduced downtime.

Titreşimli Elek ve Konveyör Makinesi Üreticisi ve Tedarikçisi

Hassas eleme, güvenilir performans ve esnek endüstriyel uygulamalar için üretilen,
Yuanjing döner titreşimli elekler, dünya çapındaki müşterilerin güvenini kazanmıştır.

Küresel Proje Deneyimi
Küresel Proje Deneyimi

Yuanjing ürünleri 50'den fazla ülke ve bölgeye ihraç edilmekte; gıda, kimya, ilaç, madencilik ve yeni enerji gibi sektörlere hizmet vermektedir.

fabrika
Güçlü Üretim Kapasitesi

Lazer kesim, CNC işleme ve otomatik kaynak özelliklerine sahip gelişmiş üretim hatları ve sıkı kalite kontrolleri, tutarlı ürün kalitesi sağlar.

Hassas ve Kararlı Ayırma
Hassas ve Kararlı Ayırma

Optimize edilmiş titreşim tasarımı, eşit malzeme akışı, yüksek eleme hassasiyeti ve uzun süreli kararlı çalışma sağlar.

Profesyonel Destek
Özelleştirilmiş Eleme Çözümleri

Yuanjing, proses gereksinimlerinize tam olarak uyum sağlamak için çap, elek göz boyutu, elek katı sayısı ve malzeme seçeneklerinde esnek yapılandırmalar sunar.

Müşteri tesisi

Screw conveyors are frequently used in conjunction with various types of vibrating screening equipment.Before selecting a conveyor for your screening line, compare screw and vacuum feeding options to check which suits your material and installation.

İlgili Ürünler

  • Ultrasonik Titreşimli Elek

    Yüksek Hassasiyetli Ultrasonik Titreşimli Elek Çözümleri Ultrasonik titreşimli elekler, ince toz eleme için idealdir; ağ tıkanmasını etkili bir şekilde önler ve ayrıştırma doğruluğunu artırır. Standart bir üç boyutlu titreşimli eleğe ultrasonik bir sistem entegre ederek, elek yüzeyi motor ve ultrasonik dalgaların birleşik etkisiyle yüksek frekanslı, düşük genlikli titreşimler üretir ve ağ verimini %5–20 artırır…
  • Döner Titreşimli Elek

    Döner Titreşimli Elek | Vibro Elek Döner titreşimli elek, tozların, granüllerin ve sıvıların verimli ayrıştırılması için tasarlanmıştır. Sürekli üretimde istikrarlı performans, yüksek eleme doğruluğu ve güvenilir çalışma sunar. Farklı işleme gereksinimlerini karşılamak için çok katlı tasarımlar, ultrasonik sistemler ve gıda sınıfı malzemeler dahil olmak üzere esnek konfigürasyonlar sunuyoruz. YuanJing pratik eleme çözümleri sunar…
  • 450 Titreşimli Filtre Eleği

    Verimli Sıvı | Toz Filtrasyonu için 450 Titreşimli Filtre Eleği YuanJing'in 450 Titreşimli Filtre Eleği ile filtrasyon verimliliğinizi –50'ye kadar artırın; gıda, kimya ve ilaç endüstrilerinde sıvıların ve tozların hassas ayrıştırılması için tasarlanmış yüksek performanslı bir çözüm. İster bulamaç filtrelemeniz, ister ince tozları elemeniz, ister ürün saflığını iyileştirmeniz gereksin, YuanJing…
  • Tambur Elek

    Endüstriyel Uygulama için Yüksek Hassasiyetli Tumbler Elek Tumbler elek, ince, kırılgan ve düzensiz malzemeler için yüksek hassasiyetli bir eleme çözümüdür. Manuel eleme hareketini simüle ederek malzeme hasarını ve tozu en aza indirirken verimli sınıflandırma sağlar. Gıda, kimya, ilaç ve mineral endüstrilerinde yaygın olarak kullanılır, tutarlı kalite ve yüksek verim sunar. Dayanıklılık ve performans için tasarlanmıştır, …
  • Yüksek Frekanslı Titreşimli Elek

    İnce Malzeme Ayırma için Yüksek Frekanslı Titreşimli Elek Yüksek frekanslı titreşimli eleme makineleri (yüksek frekanslı elekler) son derece verimlidir, düşük genliğe sahiptir ve yüksek eleme frekanslarında çalışır. Kullanımı kolaydır, enerji verimlidir ve temizlenmesi son derece kolaydır. Yüksek frekanslı titreşimli elekler (yüksek frekanslı elekler) yüksek frekanslı titreşim kullandığından, özellikle malzemelerin filtrelenmesi ve elenmesi için uygundurlar…
  • Satır İçi Titreşimli Elek

    Sürekli Üretim Hatları için Inline Titreşimli Elek Inline titreşimli elekler, sürekli üretim hatları için üretilmiştir ve tozların ve sıvıların doğrudan boru hattında elenmesine olanak tanır. Kompakt tasarım, stabil ve doğru ayırma performansını korurken alan tasarrufu sağlar. Gıda, ilaç ve kimya işlemede yaygın olarak kullanılırlar. Inline titreşimli elek nedir?…

Sıkça Sorulan Sorular

Capacity depends on screw diameter, speed, material density, and filling level.

Yes. Diameter, length, material, drive system, and discharge design can all be customised.

Delivery time depends on specifications, but standard configurations are usually completed within a short production cycle.

They are widely used in food processing, chemical production, construction materials, mining, and agriculture.

Selection is based on material properties, required capacity, conveying distance, and installation conditions.

Material type, capacity, conveying length, angle, voltage, and application details are required for accurate pricing.

Özel Çözüm Alın

Farklı malzemeler ve üretim gereksinimlerine göre özelleştirilmiş eleme ve taşıma ekipmanı çözümleri sunabiliriz.

Gereksinimlerinizi bize gönderin, ekibimiz 24 saat içinde doğru çözümü ve hızlı bir teklifi sunacaktır.

Bizi Takip Edin: