산업용 스크린 막힘: 원인 및 예방 솔루션

소개

산업용 스크린 막힘은 미세 입자, 수분, 점착성 물질 또는 정전기를 띤 분말이 스크린 구멍을 막을 때 발생합니다. 그 결과 선별 효율과 처리 용량이 감소하고 청소 빈도가 높아집니다. 적절한 해결책은 물질이 쌓이는 원인에 따라 달라집니다.

 이 글에서는 산업용 스크린 막힘 의 주요 원인을 살펴보고 선별 효율을 높이면서 스크린 망 막힘을 방지하는 실용적인 방법을 설명합니다.

산업용 스크린 막힘

산업용 스크린 막힘이란?

산업용 스크린 막힘은 선별 과정에서 입자가 스크린 망의 구멍을 막아 물질이 진동 선별기 를 효율적으로 통과하지 못할 때 발생합니다. 스크린 망 막힘의 일반적인 징후로는 선별 처리 용량 감소, 생산량 감소, 스크린 표면의 물질 축적 증가, 수동 스크린 청소를 위한 잦은 가동 중단, 스크린 망 수명 단축, 고르지 않은 제품 품질 등이 있습니다.

리튬 배터리 소재, 금속 분말 가공, 화학 제조, 광물 가공, 의약품 생산과 같은 산업에서는 산업용 스크린 막힘을 방지하는 것이 특히 중요합니다. 이러한 산업에서 사용되는 많은 물질에는 선별하기 어려운 초미세 입자가 포함되어 있어 진동 스크린 막힘을 쉽게 유발하고, 선별 효율을 떨어뜨리며, 유지보수 필요성을 높일 수 있습니다.

산업용 스크린 막힘의 원인은 무엇인가요?

스크린 막힘은 일반적으로 물질의 특성, 장비 설정값, 작업 절차, 스크린 선택 등 여러 요인이 복합적으로 작용하여 발생합니다.

범주구체적인 원인일반적인 증상
재료 특성과도한 수분 함량(>12%)2. 높은 미분 함량 및 입자 응집3. 정전기 부착(예: 탄소 분말, 리튬 배터리 소재)4. 과도한 섬유 또는 불순물스크린 표면에 진흙 덩어리가 형성됨; 입자가 뭉침; 미분이 스크린 구멍에 달라붙음
장비 매개변수부적절한 진동 진폭 또는 주파수 설정2. 편심추 각도의 잘못된 조정3. 체망 청소 장치의 고장4. 불균일한 투입으로 인한 국부적 과부하불량한 재료 층분리; 낮은 선별 효율; 체망의 국부적 막힘
체망 관련 요인재료 입자 크기에 맞지 않는 망목 크기 선택2. 불충분한 체망 장력3. 부적절한 체망 소재 선택망목 크기에 가까운 입자가 망목을 막음; 느슨한 체망으로 인한 막힘; 마모 가속화 및 짧은 수명
운전 공정과도한 투입 속도2. 부적절한 체판 경사각3. 관리되지 않는 주변 습도재료 축적; 불량한 재료 흐름; 수분 흡수 증가 및 막힘

산업용 체망 막힘을 방지하는 방법은?

재료 최적화

수분 관리:

수분 함량이 높은 재료는 건조 또는 저온 제습 처리하여 수분 함량을 8% 미만으로 유지합니다.

수분에 민감한 재료에는 밀폐 장치와 제습 시스템을 갖추어 주변 습도를 ≤60%로 유지합니다.

정전기 방지 처리:

적절한 정전기 방지제(예: 식품용 실리카)를 첨가하여 입자의 표면 전하를 줄입니다.

장비를 접지하고 이온화 에어바를 설치하여 정전기를 제거합니다.

사전 선별 및 전처리:

거친 체로 큰 입자와 섬유질 불순물을 미리 분리하여 주 체망의 부하를 줄입니다.

응집이 심한 재료는 해쇄 장치를 사용해 전처리합니다.

체망 청소 시스템 설치

바운싱 볼 청소:

입상 재료(≥60메시)에 적합하며, 고무공이 체망 아랫면을 두드려 망목의 막힘을 효과적으로 제거합니다.

당사의 코코아 분말 체질 사례 연구에서, 네덜란드의 한 가공업체는 체망 청소를 위해 하루에 서너 차례 가동을 중단하던 것을 생산 후 한 차례 청소하는 방식으로 줄였습니다. 기존 40메시 체망은 유지하면서 경화된 바운싱 볼을 교체하고, 진폭을 조정하며, 재료를 보다 일정하게 투입했습니다.

If the balls need replacing, compare sieve cleaning ball sizes and materials with the balls already fitted beneath your screen.

초음파 세척:

초미세 분말(≤625메시)과 정전기가 발생하기 쉬운 재료에 적합하며, 고주파 진동이 입자 간 부착력을 약화시킵니다.

실제 사례는 당사의 초음파 보조 비타민 C 분말 선별 프로젝트를 참조하세요. 호주 제조업체를 위한 이 프로젝트에서는 이물질 제거 중 망 막힘을 줄이기 위해 1800mm 텀블러 스크린과 초음파 시스템을 결합한 솔루션을 선택했습니다.

아이싱 슈거 용도에 대해서는 당사의 분말 설탕 선별기 선택, 초음파 망 세척을 고려할 만한 경우 등을 다루는 가이드를 참조하세요.

3. Rotary Brush Cleaning:

Suitable for slurries or viscous materials; a rotating brush continuously cleans the screen surface.

4. Combined Cleaning:

Utilizes a dual “Bouncing Ball + Ultrasonic” system to meet the screening requirements of complex materials.

Screen Selection and Maintenance

1. Material Selection:

For the food and pharmaceutical industries, select 316L stainless steel (compliant with GMP requirements).

For corrosive materials, select titanium alloy or specially coated screens.

For high-temperature materials, select heat-resistant alloy materials.

2. Specification Matching:

The screen mesh count should be 1–2 levels finer than the target particle size to prevent “near-size” particles from becoming lodged in the apertures.

For fine screening (>300 mesh), prioritize multi-layer composite screens to extend service life.

3. Routine Maintenance:

Maintain screen tension at 85–90% and regularly inspect and replace aged screens.

Use a high-pressure air gun for back-blowing and cleaning; avoid scratching the screen surface with hard objects.

Conduct thorough inspections before, during, and after the screening process.

Keeping spare mesh on hand can reduce delays when a screen needs replacing. In our coconut powder screening case, the Malaysian customer included spare mesh in the order to prepare for future maintenance.

스크린 메시

What Is the Difference Between Screen Clogging and Screen Blinding?

Screen clogging and screen blinding both reduce screening efficiency, but they describe slightly different problems.

  • 스크린 막힘 refers to screen openings being blocked by material, which reduces material flow and screening capacity.
  • Screen blinding occurs when fine, wet, sticky, or electrostatic materials cover or block the screen openings, reducing the effective screening area.
  • Screen pegging happens when particles close to the size of the screen openings become stuck in the mesh.

These problems are often caused by moisture, sticky materials, fine powders, static electricity, or unsuitable mesh selection. Choosing the right screen mesh, adjusting vibration and feeding conditions, and using suitable screen cleaning systems can help reduce clogging and blinding.

With moist or oily feed, check whether deposits are coating the screen or particles are lodged in the openings. Our guide to feed pellet screen blockage explains what to inspect and when bouncing-ball cleaning may help.

Ultrasonic Screen Cleaning vs Traditional Screen Cleaning Methods

특성Traditional CleaningUltrasonic Cleaning
Cleaning methodMechanical impactHigh-frequency vibration
Fine powder screeningLimitedExcellent
Screen damageHigher낮음
Manual maintenanceFrequentReduced
Continuous operationLimitedBetter

관련 동영상

Industries That Benefit from Anti-Clogging Screening Solutions

Screen clogging is a common challenge in industries that process fine powders, sticky materials, and electrostatic particles. Once the screen openings become blocked, screening efficiency decreases, cleaning frequency increases, and product consistency can be affected. Effective anti-clogging screening solutions help maintain stable production and improve overall screening performance.

Lithium Battery Material Screening

Lithium battery materials such as graphite, cathode materials, and anode powders often contain ultrafine particles that are difficult to screen. These fine powders can easily accumulate on the screen surface or block mesh openings, reducing screening capacity.

Using lithium battery powder screening equipment equipped with advanced ultrasonic cleaning technology helps improve powder flowability, keep screen openings clear, and achieve stable particle size separation.

Pharmaceutical Powder Screening

Pharmaceutical powder screening requires high accuracy and strict quality control. Fine particles, moisture, and electrostatic charges can often lead to pharmaceutical powder sieving challenges, causing screen clogging and unstable production output.

Screening solutions equipped with ultrasonic systems help reduce screen blockage while ensuring clean, accurate, and continuous powder processing.

Metal Powder Screening

Metal powders used in additive manufacturing, coatings, and other applications typically have fine particle sizes and strong electrostatic properties. These characteristics create challenges when operating 금속 분말 스크리닝 장비 with traditional screening methods.

Combining bouncing balls with ultrasonic anti-clogging systems helps prevent powder buildup, improve screening efficiency, and reduce downtime caused by frequent screen cleaning.

Chemical and Mineral Powder Screening

Chemical powders and mineral materials may contain fine, irregular, or high-moisture particles that are prone to causing screen clogging. In these applications, keeping screen openings clear is essential for maintaining stable production.

Installing rotary brush screen cleaning systems helps reduce material buildup, increase processing capacity, and extend screen mesh service life in demanding industrial environments.

For resin-based coating powders, see how to reduce agglomeration and mesh blinding in powder coatings through powder conditioning, controlled feeding, and suitable de-blinding methods.

For gypsum applications, see our guide to 석고 분말 체 막힘 for checks on moisture, trapped particles and powder buildup, along with suitable cleaning methods.

결론

Screen clogging in industrial screening is mainly caused by fine particles, moisture, static electricity, improper mesh selection, and unsuitable screening conditions. Choosing the right screen and cleaning system helps maintain screening efficiency, reduce downtime, and lower maintenance costs.

If you are facing screen blockage issues or looking to improve screening performance, our technical team can provide a customized 초음파 진동 스크린 solution based on your material characteristics and production requirements.

자주 묻는 질문

진동 스크린은 미세 입자, 수분, 정전기, 부적절한 메쉬 선택 또는 불충분한 세척 시스템으로 인해 자주 막힙니다.

초음파 진동 시스템, 적절한 메시 선택, 최적화된 공급 조건을 사용하면 스크린 막힘을 크게 줄일 수 있습니다.

예. 초음파 진동은 스크린 표면에 직접 고주파 진동을 가함으로써 메시 구멍이 막히지 않도록 유지하는 데 도움이 됩니다.

예. 이는 수동 세척으로 인한 다운타임을 줄이고 스크리닝이 어려운 분말에 대한 스크리닝 일관성을 향상시킵니다.

미세 분말, 점착성 물질, 정전기 분말 및 고수분 물질은 스크린 막힘을 일으킬 가능성이 더 높습니다.

네. 초음파 스크리닝은 막힘 방지 기능 덕분에 리튬 배터리 소재 및 흑연과 같은 미세 분말에 널리 사용됩니다.

관련 기사