Flaxseed Vibrating Screen for a Canadian Customer: YJ-1000-2S Case Study
A customer in Canada needed a flaxseed vibrating screen with 2 mm and 3.5 mm screen openings. Based on the space available in their workshop, they requested a 1000 mm diameter machine with a 220 V, 60 Hz, single-phase power supply.
We recommended the YJ-1000-2S double-deck model from our rotary vibrating screen range, made entirely of 304 stainless steel. The customer also purchased spare screen frames for future replacements.
After putting the machine into operation, the customer reported that it separated the flaxseed into the sizes they wanted. They also found it easy to clean, take apart, and change the screen frames.

Project Overview
| Item | Project Details |
|---|---|
| Customer location | Canada |
| Material | Flaxseed |
| Screen openings | 2 mm and 3.5 mm |
| Requested machine diameter | 1000 mm |
| Power supply | 220 V, 60 Hz, single-phase |
| Recommended model | YJ-1000-2S |
| Screen decks | 2 |
| Construction material | 304 stainless steel throughout |
| Additional purchase | Spare screen frames |
What the Customer Needed
The customer’s requirements gave us three starting points for selecting the flaxseed vibrating screen: two specific screen openings, a fixed machine diameter, and a single-phase power supply.
2 mm and 3.5 mm Screen Openings
The customer wanted to separate flaxseed into the required size fractions using 2 mm and 3.5 mm screens. A double-deck configuration accommodated both openings in one machine.
We kept the screen specifications in millimeters of opening size throughout the selection process. This avoided confusion with mesh count when defining the equipment configuration.
Screen openings are one part of equipment selection. Material properties, required throughput, and the number of size fractions also need consideration. Our rotary vibrating screen selection guide explains how these factors affect the choice of machine.
A 1000 mm Machine to Fit the Workshop
The customer had already considered their workshop conditions and specified a 1000 mm diameter machine. We therefore based our recommendation on the YJ-1000 series.
For installation planning, the nominal diameter is only one measurement. The overall footprint, discharge outlet positions, and space needed for maintenance should also be checked against the equipment drawing.
220 V, 60 Hz, Single-Phase Power
The electrical supply was specified during the requirements discussion. The machine needed to operate on 220 V, 60 Hz, single-phase power, so this requirement was included in the electrical configuration from the outset.
For projects with specific space or electrical requirements, our custom rotary vibrating screen options cover machine diameter, deck count, construction materials, inlet and outlet arrangements, and electrical configuration.

Our Flaxseed Vibrating Screen Solution
We recommended the YJ-1000-2S with two screen decks, full 304 stainless steel construction, and an electrical configuration matched to the customer’s specified supply.
Two Decks for Size Separation
The proposed flaxseed vibrating screen uses a 3.5 mm screen on the upper deck and a 2 mm screen on the lower deck. Material passes through the two screening stages in sequence.
This arrangement separates the feed into three fractions:
- Material retained on the 3.5 mm screen;
- Material that passes through the 3.5 mm screen but remains on the 2 mm screen;
- Fine material that passes through the 2 mm screen.
The use of each fraction depends on the customer’s product requirements and the material being processed. For this project, the customer later confirmed that the screen arrangement produced the particle sizes they needed.
Two-deck grading is also used in other seed-processing applications. Our cumin seed screening case in India shows a different approach, using a linear vibrating screen selected around that customer’s material and workshop layout.
304 Stainless Steel Construction
The machine was specified in 304 stainless steel throughout.
After screening, residual material needs to be removed from the screens and internal surfaces. Stainless steel makes routine cleaning convenient, while the removable components provide access for inspection and screen frame replacement.
The customer specifically mentioned easy cleaning and disassembly in their feedback.
Spare Screen Frames
The customer also purchased spare screen frames for the flaxseed vibrating screen.
Keeping replacement frames on hand makes it easier to arrange future screen changes. When a frame needs replacing, the customer has a spare available without having to source one at that point.
Equipment Specifications
| Parameter | Configuration |
|---|---|
| Model | YJ-1000-2S |
| Equipment type | Double-deck vibrating screen |
| Nominal size | 1000 mm class; overall dimensions subject to the approved drawing |
| Screening material | Flaxseed |
| Number of screen decks | 2 |
| Upper screen opening | 3.5 mm |
| Lower screen opening | 2 mm |
| Construction material | 304 stainless steel throughout |
| Voltage | 220 V |
| Frequency | 60 Hz |
| Power phase | Single-phase |
| Additional accessories | Spare screen frames |
Throughput and motor power are not listed because confirmed figures were not provided for this project. Both depend on the material conditions and final equipment configuration.
Features That Mattered in Daily Use
For this customer, the flaxseed vibrating screen needed to do its job within the workshop’s space and power constraints. Cleaning and screen changes also mattered once the machine was in regular use.
Size Separation with Two Screen Openings
The double-deck arrangement accommodated the requested 3.5 mm and 2 mm screens in a single unit. According to the customer’s operating feedback, it separated the flaxseed into the desired size fractions.
Machine Size and Electrical Supply
The 1000 mm model followed the customer’s workshop requirement. Its electrical configuration matched the specified 220 V, 60 Hz, single-phase supply.
Access for Cleaning and Maintenance
The customer found the stainless steel surfaces easy to clean and the machine convenient to disassemble. This made it easier to reach the screens and internal areas during routine maintenance.
Convenient Screen Frame Replacement
The customer also reported that replacing the screen frames was straightforward. The spare frames purchased with the machine were available for later changes.
Customer Feedback on the Flaxseed Vibrating Screen
After putting the machine into operation, the Canadian customer reported good screening results. It met their requirements and separated the flaxseed into the particle sizes they wanted.
Their feedback covered maintenance as well. The stainless steel construction was easy to clean, the machine was convenient to take apart, and screen frame replacement was straightforward.
The customer’s comments reflect the practical requirements behind the original selection: obtaining the desired size fractions while keeping cleaning and maintenance manageable.
Discuss Your Screening Requirements with Our Team
If you need a flaxseed vibrating screen for your operation, contact our team with the details of your application:
- Material type, with photos or sample information if available;
- Required particle sizes or screen openings;
- Target throughput;
- Available workshop space;
- Power supply voltage, frequency, and phase.
We can help you select a suitable machine model, screen arrangement, construction material, and spare screen frames based on those requirements.
